Dash Depth Transducer, Digital Depth Sounder Waterproof Depth Finder Transducer with White Backlight Portable Fish Finder Transducer Marine Depth Display for Yachts Fishing Boats

Spec:
Item Type: Depth Sounder
Material: Stainless steel 316L, anti fog glass, ABS
Mounting Hole Diameter: Approx. Φ52mm/2in
Depth Indication Range: 0-100m/0-328FT
Backlight Color: White
Operating Voltage: DC 12V
Instantaneous Voltage: DC 9-32V, up to 36v
Operating Current: 60mA
Operating Temperature: -30 °C- + 75 °C
Storage Temperature: -40 °C – + 85 °C
Dial Waterproof Rating: IP67
Back Cover Waterproof Rating: IP5
Operation:
A. This device is work with 12V system only, to indicate the depth appointed. Normally, the buzzer beeps once when it was connected correctly then turn on the power
B. Keypad”Mode”: Quick press the keypad”Mode” to switch SH/DP/KL/ UN Hold the keypad”Mode” to turn on/off the monitor Short press the keypad”▲””▼”to set the value required Hold the keypad”▲””▼”to keep the digital increasing/decreasing fluently.
Parameter: SH: (Low level alarm) Range: 0-0.6-19.9, when the level no more than value(SH) appointed,the symbol flickering and the buzzer beeps all the time. If SH=0 –>No alarm Alarm setting range :0.6-19.9
Range: 1). Unit”M”: 0-99 2). Unit”FT”:0-199 3). Unit”F”: 0-49 If the level exceed the a ppointed value , the buzzer will beeps twice Keel offset (KL):
Range: 1). Unit”M”: 0-6.0 2). Unit”FT”:0-19.9 3). Unit”F”:0-3.3

Packing List:
1 x Depth Sounder
1 x Transducer (with 10m cable)
2 x Screw
1 x Power Cord
1 x Manual

Application: Easy to install, good durability, impact resistant, flexible and easy operation, suitable for yachts, small and medium sized boats, fishing boats and other types of marine transportation.
Material: Made of stainless steel 316L bezel and anti fog glass, it has excellent anti fog and waterproof properties, and can be used for a long time even in cold sea environments.
Practical: The working voltage is 9‑32V, up to 36V, low power consumption, long life, high accuracy, short start up time, the highest depth indication of 100m, you can instantly know the depth of the water.
Mode: Press keypad Mode to switch SH, DP, KL, UN function. Used to turn on or off the monitor. Short press to set the value required, and keep the digital increasing or decreasing fluently.
Function: This device is work with 12V system only, to indicate the depth appointed. Normally, the buzzer beeps once when it was connected correctly then turn on the power.